Shunchen Steel provides precision concrete-to-steel connections for building facades and structural applications. We offer factory-direct OEM custom fabrication, bulk order supply, and strict adherence to your engineering drawings.
Product Overview
A Fabricated Steel Embedment Plate for Curtain Wall Systems is installed in or connected to a concrete structure to provide a reliable fixing point for curtain wall brackets, steel connectors, and other facade components. Depending on its configuration, the plate may incorporate welded anchor bars, bolt holes, or other connection features.
The plate efficiently transfers connection forces between attached components and the supporting structure. Its dimensions, material, anchor arrangement, and weld details should be determined by the approved engineering design, including specified loads and concrete connection requirements.
Key Features
1. Custom Dimensions & Hole Layout
Plate length, width, thickness, bolt-hole diameter, and hole spacing can be customized. Standard sizes range from 200×200mm to 600×600mm (8–20mm thick), with custom dimensions up to 1,000×1,000mm available upon review.
2. Anchor & Welding Configurations
Fabricated with precision anchor components and welded connections. Anchor type, quantity, spacing, embedment depth, and weld dimensions strictly follow the approved structural drawings to ensure load capacity.
3. Premium Material Options
Available in Q235B and Q345B carbon steel, as well as 304 and 316 stainless steel Material selection depends on specified mechanical properties and exposure conditions.
4. Fabrication & Dimensional Control
Utilizing CNC cutting, laser drilling, and precision stamping. We deliver a conventional outline tolerance of ±0.5mm and a precision-grade tolerance of ±0.2mm to meet rigorous B2B standards.
Technical Specifications
The following parameters serve as a reference. Final dimensions and tolerances will be confirmed in your approved engineering drawing.
| Specification Category | Item | Reference Parameters | Application Notes |
|---|---|---|---|
| Base Dimensions | Standard Size | Length/width: 200 × 200 mm to 600 × 600 mm; thickness: 8–20 mm | Final dimensions depend on the approved structural drawings. |
| Base Dimensions | Custom Size | Max length/width: up to 1,000 × 1,000 mm; min thickness: 5 mm | Subject to fabrication capability and design requirements. |
| Dimensional Tolerance | Outline Dimensions | ±0.5 mm (conventional); ±0.2 mm (precision grade) | Confirm the applicable tolerance for each drawing. |
| Hole Accuracy | Hole Center Spacing | ≤ ±0.2 mm | Confirm measurement basis and inspection method. |
| Hole Accuracy | Hole Diameter | ±0.1 mm | Subject to the agreed drawing and production capability. |
| Materials | Carbon / Stainless Steel | Q235B, Q345B / 304, 316 | Grade selection depends on design, exposure, and mechanical properties. |
| Mechanical Properties | Strength Reference | Q235B: ≥ 235 MPa; Q345B: ≥ 345 MPa; Shear: ≥ 120 MPa | Confirm applicable strength property and material certificate before use. |
| Surface Treatment | Galvanizing / Coating | Hot-Dip Galvanizing ≥ 80 μm; Fluorocarbon ≥ 40 μm | Confirm coating requirements and inspection criteria. |
| Fabrication | Cutting and Welding | CNC cutting, laser drilling; Weld dimensions per drawing | Weld quality inspected against applicable requirements. |
| Flatness | Plate Flatness | ≤ 1 mm/m | Confirm inspection method and applicable tolerance. |
Fabrication Process
Drawing Review
Engineers review the fabrication drawing to define dimensions, hole positions, and anchor configuration prior to production.
Cutting & Drilling
Steel plates are precisely cut and bolt holes are processed via CNC cutting or laser drilling to achieve the required geometry.
Anchor Welding
Welded anchors and attachments are positioned strictly according to the approved drawing and inspected for quality.
Inspection & Coating
Completed plates are checked for overall dimensions, hole positions, and flatness before applying surface treatment.
Applications
1. Glass Curtain Wall Systems
Fabricated Steel Embedment Plate for Curtain Wall Systems provides connection points for curtain wall brackets and supporting steel components attached to concrete structures. Plate dimensions, anchor configuration, and bolt-hole layout should match the curtain wall connection design.
2. High-Rise Building Facades
For high-rise facade projects, embedment plate positioning and connection tolerances affect bracket alignment and installation. Drawing coordination, anchor placement, and dimensional inspection help reduce alignment issues during facade assembly.
3. Industrial Buildings & Transportation Hubs
Fabricated embedment plates can be used at designated steel-to-concrete interfaces in industrial facilities, including structural supports and equipment bases. Airports, railway stations, and other transportation facilities may use embedment plates to connect facade systems and supporting components to concrete structures.
4. Municipal Infrastructure
Where included in the structural design, embedment plates can provide fixing points for guardrail supports, service structures, and other concrete-connected components in municipal projects. Corrosion protection should be selected according to the exposure environment and maintenance requirements.
Quality Control & Material Selection
We implement rigorous quality control to ensure structural integrity and compliance:
- Material Verification: Checking the specified steel grade and providing relevant material documentation.
- Dimensional Inspection: Measuring plate length, width, thickness, hole positions, and flatness against the approved drawing.
- Weld Inspection: Inspecting weld dimensions and visible weld quality according to specified acceptance criteria.
- Surface Treatment Inspection: Verifying coating thickness and finish quality where required.
- Documentation: Arranging material certificates and inspection records according to order requirements.
Q235B and Q345B carbon steel are standard options, while stainless steel grades 304 and 316 may be considered where the project requires additional corrosion resistance. For outdoor or corrosive environments, hot-dip galvanizing or a specified coating system may be used. The required coating thickness, surface preparation, and inspection criteria should be confirmed before production.
Custom Fabrication Options
Shunchen Steel reviews fabrication requirements based on the information supplied for each project. Customization covers:
- Plate length, width, and thickness
- Bolt-hole diameter, spacing, and layout
- Anchor component type, quantity, and position
- Weld dimensions and attachment configuration
- Carbon steel or stainless steel material options
- Hot-dip galvanizing, fluorocarbon coating, or other specified finishes
- Inspection requirements, packaging, and delivery arrangements
For an accurate quotation, provide the fabrication drawing, material grade, required quantity, surface treatment, dimensional tolerances, and delivery destination.
Why Choose Shunchen Steel?
Tianjin Shunchen Steel Co., Ltd. was established in 2014 in the Daqiuzhuang Industrial Zone, Tianjin. It operates within the Tianjin Shunchen Hongye enterprise group, which covers steel trading, steel processing, hot-dip galvanizing, warehousing and logistics, photovoltaic structures, and international trade.
The group reports an annual production capacity exceeding 450,000 tons, an output value approaching RMB 2 billion, and a workforce of more than 300 employees. As a factory-direct supplier, we ensure that project requirements are reviewed against the requested material, dimensions, hole layout, anchor details, and welding. We support bulk order supply with reliable delivery schedules and complete quality documentation. Check our ISO 9001 certification for quality assurance.
Frequently Asked Questions
1. What information is needed to fabricate a curtain wall embedment plate?
Provide the fabrication drawing or a complete specification showing plate dimensions, thickness, material grade, hole layout, anchor details, weld requirements, and surface treatment. The order quantity and delivery destination are also needed for quotation.
2. Can the plate dimensions and hole positions be customized?
Yes. Plate dimensions, thickness, hole diameter, and spacing can be specified according to the approved drawing. The required tolerances (such as ±0.2mm) should be confirmed before production.
3. Which materials are available for bulk orders?
The supplied product information lists Q235B and Q345B carbon steel, along with 304 and 316 stainless steel. Final material availability should be confirmed for the requested dimensions and quantity.
4. Which surface treatments can be specified?
Listed options include hot-dip galvanizing (≥80μm), fluorocarbon coating (≥40μm), and mirror polishing for suitable applications. The treatment should be selected according to the base material, exposure environment, and project specification.
5. Can Fabricated Steel Embedment Plate for Curtain Wall Systems be supplied with welded anchors?
Welded anchors or other attachments can be included where supported by the product design and fabrication requirements. Anchor dimensions, placement, and weld details should be shown on the approved drawing.
6. What quality documents can be provided?
Material certificates and inspection records can be arranged according to the agreed order requirements. Any special requirements for weld inspection, nondestructive testing, dimensional reports, or coating tests should be specified before production.
Request a Quotation for Fabricated Steel Embedment Plates
Contact Shunchen Steel with your drawing, material grade, plate dimensions, hole layout, anchor configuration, surface treatment, and required quantity. The fabrication requirements can then be reviewed for specification, production feasibility, inspection arrangements, and delivery planning.
Send an Inquiry Now
